NOVA SUPER SERIES
DUAL SOURCE: GLASS DC + RF METAL
Glass tube power for cutting. RF metal tube precision for engraving — down to 1 mm lettering, at up to 2,000 mm/s. The NOVA Super runs both sources on one bed, switching in software mid-job. Premium engraving and heavy cutting stop being separate machines.
Who it's for
- Businesses selling both cut product and premium engraved detail (awards, signage, personalisation at scale)
- Shops currently running two machines — or turning away fine-detail work
- Production engravers where RF resolution wins the high-end customer
- Anyone quoting jobs that mix thick cutting and fine marking on the same piece
Why two sources
| Glass DC tube gives you | RF metal tube gives you |
|---|---|
|
Raw cutting power — up to 260W on the flagship |
Ultra-fine detail — minimum 1.0 × 1.0 mm font |
|
Thick acrylic, timber and sheet stock |
Engraving speeds up to 2,000 mm/s |
|
Economical tube replacement |
Long service life, fast pulsing, crisp edges |
|
The cut |
The finish |
Model line-up
| Model | Sources | Working area |
|---|---|---|
|
NOVA10 Super |
100W glass + RF30W |
1000 × 700 mm |
|
NOVA14 Super |
130W glass + RF30W or RF60W |
1400 × 900 mm |
|
NOVA16 Super |
150W glass + RF30W or RF60W |
1600 × 1000 mm |
|
NOVA16 Super 260W (flagship) |
260W glass + RF60W |
1600 × 1000 mm |
The 260W flagship.
With 260W of cutting power, 20 mm acrylic cuts like butter — while the RF60W source delivers detailed, high-quality engraving on the same bed. The biggest jobs and the finest finishes, one machine.
Shared specification block
The NOVA Super is built on the NOVA Elite platform. Everything from the Elite spec applies:
- Frame sizes, Z-lift (200 mm), table capacity (120 kg) and machine dimensions as per the matching Elite model
- Built-in chiller, 500W exhaust and 750W air compressor with receiver tank
- Smart monitoring panel with fault alarm and diagnosis; intelligent maintenance reminders
- Splits to fit through a standard doorway
- AutoFocus, WiFi, red-dot positioning, pass-through door, honeycomb + knife tables
- High-resolution LightBurn camera supported; RDWorks included, LightBurn optional (Windows & Mac)
- Class 1 · CE certified · FDA approved · 1-year machine & parts warranty · 6 months on laser tube
Feature sections
Software source-switching
Assign cut layers to the glass tube and engrave layers to the RF tube in LightBurn. The machine handles the rest — no tool change, no re-fixturing, no second setup.
One bed, whole job
Cut the piece and finish it in the same clamping. Fewer handling steps, tighter registration, faster turnaround.
Elite platform underneath
Everything that makes the NOVA Elite reliable — sealed optics, clean-pack rails, smart diagnostics, all-in-one cabinet — carries straight over.
The high-end customer machine
RF engraving quality is what wins premium awards, gifting and branded work. The Super lets you chase that market without giving up cutting throughput.
Information Questions
Frequently Asked Questions
Tell us what you plan to cut or engrave, the materials and roughly the sizes, and we will recommend the right bed size and wattage. We would rather point you to a smaller machine that suits than oversell you one you do not need.
Yes, we deliver, install and train anywhere in Ireland.
All machines run RDWorks, included as standard, and are fully compatible with LightBurn (optional), which most users prefer. They work with design files from CorelDRAW, Illustrator and AutoCAD, on Windows and Mac.
Yes. They are fully enclosed Class 1 laser products with lid and side-panel interlocks that cut the laser if opened, CE certified and FDA approved. They are widely used in supervised school and college settings.
One year on the machine and parts, and six months on the laser tube. Full terms are on our Terms of Warranty page.
Quick Enquiry
Customer Reviews
EXCELLENT
Based on 20 reviews
Michael
a year ago
Excellent machine and outstanding service. Delivery was quick, installation was professionally handled, and the training made it easy for our entire team to start working confidently.
Sophia
a year ago
We are extremely happy with our Aeon laser. Everything arrived exactly as promised, installation was smooth, and the support team answered every question quickly and professionally.
David
a year ago
From ordering through installation, the experience was excellent. Having the machine in Irish stock made delivery straightforward, while training and support gave us confidence.
Olivia
a year ago
The Aeon machine has been a fantastic addition to our workshop. Fast delivery, professional commissioning, and excellent training made the entire process simple, smooth, and hassle-free.
James
a year ago
Great quality machine backed by brilliant service. Installation was seamless, training was thorough, and having reliable local support gives our team complete confidence moving forward too.
In stock in Ireland.
Installed by us.
Same delivery and installation programme as the NOVA Elite: site check, nationwide delivery, on-site assembly, commissioning of both laser sources, LightBurn dual-source setup and operator training. Spares for both tube types held in Ireland.